Sony CCD-TRV138 - Handycam Camcorder - 320 KP, Руководство по обслуживанию

Страница: 164 / 197

T
rou
bl
esh
oot
in
g
Troubleshooting
85
Playback
Flickering or changes in color occurs. c This occurs when recording pictures under a fluorescent lamp, sodium
lamp, or mercury lamp in the soft portrait or sports lesson mode. Cancel
[PROGRAM AE] in this case. (p. 43)
END SEARCH does not work. • The cassette was ejected after recording.
• The cassette is new and has nothing recorded.
END SEARCH does not work
correctly. • There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
The built-in light does not function.
c
Press LIGHT repeatedly to select .
c
If the problem persists, contact your Sony dealer or local authorized
Sony service facility.
Symptom Cause and/or Corrective Actions
Cannot play back.
c
If the tape has reached the end, rewind the tape. (p. 33)
Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.
c
Clean the head using the cleaning cassette (optional). (p. 99)
• For TRV238E/438E:
The television’s video channel is not adjusted correctly.
c
Adjust it. (p. 38)
c
For TRV238E/438E:
Set [EDIT] to [OFF] in the
(PLAYER SET) menu. (p. 50)
No sound or only a low sound is
heard.
c
For TRV270E/285E:
Set [HiFi SOUND] to [STEREO] in the
(PLAYER SET) menu for
TRV270E, or in the (VCR SET) menu for TRV285E. (p. 50)
c Turn up the volume. (p. 33)
c For TRV270E/285E:
In the
(PLAYER SET) menu for TRV270E, or in the (VCR
SET) menu for TRV285E, adjust [AUDIO MIX] from the [ST2] side
until the sound is heard appropriately. (p. 51)
c Make sure the black plug for TRV238E/438E, or the red and white
plugs for TRV270E/285E of the A/V connecting cable are connected
as well. (p. 38)
The sound breaks off. c Clean the head using the cleaning cassette (optional). (p. 99)
For TRV285E:
Cannot perform the Date search with
the recording date displayed on the
screen. • There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
For TRV270E/285E:
“---” is displayed on the screen. • The tape you are playing was recorded without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or noise cannot be read.
END SEARCH does not work. • The cassette was ejected after recording.
• The cassette is new and has nothing recorded.
END SEARCH does not work
correctly. • There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
Symptom Cause and/or Corrective Actions
, continued