background image

2

US

SONY CAV-CVS12ES (US) 3-198-136-

11

(1)

WARNING

To reduce the risk of fire or electric 

shock, do not expose this 

apparatus to rain or moisture.
To reduce the risk of fire or electric 

shock, do not place objects filled 

with liquids, such as vases, on the 

apparatus.

This symbol is intended to alert the 
user to the presence of uninsulated 
“dangerous voltage” within the 
product’s enclosure that may be of 
sufficient magnitude to constitute a 
risk of electric shock to persons.

This symbol is intended to alert the 
user to the presence of important 
operating and maintenance 
(servicing) instructions in the 
literature accompanying the 
appliance.

WARNING

This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference in a 
residential installation. This equipment 
generates, uses, and can radiate radio frequency 
energy and, if not installed and used in 
accordance with the instructions, may cause 
harmful interference to radio communications. 
However, there is no guarantee that interference 
will not occur in a particular installation. If this 
equipment does cause harmful interference to 
radio or television reception, which can be 
determined by turning the equipment off and 
on, the user is encouraged to try to correct the 
interference by one or more of the following 
measures:
–  Reorient or relocate the receiving antenna.
–  Increase the separation between the 

equipment and receiver.

–  Connect the equipment into an outlet on a 

circuit different from that to which the 
receiver is connected.

–  Consult the dealer or an experienced radio/

TV technician for help.

CAUTION

You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate this 
equipment.

Important Safety Instruction

1  Read these instructions.
2  Keep these instructions.
3  Heed all warnings.
4  Follow all instructions.
5  Do not use this apparatus near water.
6  Clean only with dry cloth.
7  Do not block any ventilation openings. 

Install in accordance with the manufacturer’s 
instructions.

8  Do not install near any heat sources such as 

radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that 
produce heat.

9  Do not defeat the safety purpose of the 

polarized or grounding-type plug. A 
polarized plug has two blades with one wider 
than the other. A grounding type plug has 
two blades and a third grounding prong. The 
wide blade or the third prong are provided 
for your safety. If the provided plug does not 
fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10  Protect the power cord from being walked 

on or pinched particularly at plugs, 
convenience receptacles, and the point 
where they exit from the apparatus.

11  Only use attachments/accessories specified 

by the manufacturer.

12  Use only with the cart, stand, 

tripod, bracket, or table 
specified by the manufacturer, 
or sold with the apparatus. 
When a cart is used, use 
caution when moving the cart/
apparatus combination to avoid 
injury from tip-over.

13  Unplug this apparatus during lightning 

storms or when unused for long periods of 
time.

14  Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

Welcome!

Thank you for purchasing the Component 
Video Switcher. Before operating the unit, please 
read this manual thoroughly and retain it for 
future reference.

Содержание CAV-CVS12ES - Component Video Switcher

















Отзывы: