Works with
: Any consumer camcorder. Mount via supplied case/mount and 1/8” stereo mini-plug connector. For
camcorder models using the A-8278-057-A or BKW-L601 bracket, the WRR-805A may be mounted using an optional,
dual mounting adapter (X-0248-167-1).
Anton Bauer Adapter System
(for use with compatible Anton Bauer NiCad
batteries).
The
WRR-805A
Tuner shown
mounted to a DCR-
VX100 0camcorder.
Using a locking
Velcro strap,
mounting to the
camcorder is very
easy. The mount
also rotates to
facilitate the proper
angle for reliable
reception.
The
”4-hole”
mount is used
by several Sony professional
camcorder bracket systems,
including:
•
A-8278-057-A (included
with: BKW-L601, BKW-
L201, BKW-L403)
•
X-0248-167-1
•
BTA-801
•
NP-1
•
DC-500
•
Anton Bauer QR-SDH or
QR-DSR with ABWMK-
KIT
The
”V-Wedge”
mount is
used by:
•
CA-WR855 (for DSR-
300 & 500
only
)
The 4 rear-mounting screw
holes will allow attachment
of the A-8278-057-A bracket,
alternatively.
Balanced mic/line inputs 1 & 2 (left) and 4-pin DC
connector (right) on back of DSR-500 camcorder.
Standard connectors on all Broadcast model Sony
camcorders BETACAM, BetaSP, Digital Beta,
HDCAM, DV (located opposite side on some models).
Anton Bauer QR-SDH
battery adapter shown
with
ABWMK-KIT
mounted. The ABWMK-
KIT comes supplied with
a side mount and rear-
mount plate adapter.
These are both configured
like the 4-hole mounting
system above and allows
mounting of the BTA-
801, WRR-810A or X-
0248-167-1 mounting
adapter.
Anton Bauer QR-SDH
Shown again with just the
side plate portion of the
ABWMK-KIT. This side
plate has three screw
positions for mounting at
various distances from the
battery.
*Note
: The BTA 801A
may be mounted to either
of these two plates.
However, the user will
need to provide a slightly
longer DC cable, as the
one supplied with the
BTA-801A
Configuration # 4 WRR-805A UHF Tuner
Sony Wireless Mounting Standards
-8-
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
