Sony CA-570, Руководство по обслуживанию

Страница: 14 / 36

1-10 (E)
CA-570 P1
S1
S4
A
B
C
D
E
F
G
1 2 3 4
DM-116 BOARD (A SIDE)
DM-116 board
Ref.No. Name Description Factory setting
S1 PROMPT/GEN Factory use PROMPT
n
Do not change this switch from its factory setting
S4 CCU 8 CAM Selects the direction to transmit the PROMPTER signal as follows. CCU 8 CAM
/CAM 8 CCU (This switch is activated only when the unit is connected with the CCU-700A/700AP)
CCU 8 CAM: PROMPTER signal is transmitted from the CCU to the unit and
is then output at the PROMPTER/GENLOCK connector of the unit
CAM 8 CCU: PROMPTER signal is input at the PROMPTER/GENLOCK connector
of the unit and is then transmitted to the CCU
n
When this switch is changed to “CAM 8 CCU” side, be sure to disconnect
the RF cable (green) and connect it to a proper connector on the DM-116 board
as shown in the figure above
In addition, be sure to change the setting of S5 and S6 switches on the DM board
of the CCU from TX to RX
1-4. Function of Internal Switches
RF cable connection
RF cable (Green)
MD-116