Sony BVM-X300, Руководство по эксплуатации

Страница: 20 / 42

Adjustment Using the Menus
20
1) The offset value applied (x-0.006, y-0.011) is based on the Judd’s
function to the CIE 1931 (x, y) value.
2) If you select each setting item while the MANUAL button is turned
on, the MANUAL button is turned off and the manually set value is
copied.
[Color Temp.] menu
You can select and adjust the color temperature.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konica Minolta Color Analyzer CA-
210/310
[User Configuration] menu
Executes [System Setting], [Input Setting], [Function
Button Setting], [Audio Setting], [Internal Signal
Setting], [Gamut Marker Setting], and [Area and Aspect
Marker Setting].
[Chroma] Set the chroma level of the selected User
Preset.
2)
Note
When [S-Log3(HDR)], [S-
Log2(HDR)], [SMPTE ST 2084(HDR)],
[HLG SG 1.2(HDR)] or [HLG SG
Variable(HDR)] is selected for [EOTF]
in the [Input Setting] menu, this does
not function.
For details on the EOTF setting, see
page 23.
[Aperture] Set the aperture of the selected User
Preset.
[Volume] Adjusts the volume of the selected User
Preset.
[Marker Preset] Select the marker preset to be used in
the selected User Preset.

[Marker Preset1]

[Marker Preset2]

[Marker Preset3]

[Marker Preset4]

[Marker Preset5]
[Copy From] Copies the other User Preset data to the
selected User Preset. The appropriate
settings are saved in [Default(D65)] for
D65, [Default(D93)] for D93, and
[Default(XYZ)] for XYZ format signal.

[User Preset1]

[User Preset2]

[User Preset3]

[User Preset4]

[User Preset5]

[Default(D65)]

[Default(D93)]

[User Preset XYZ]

[Default(XYZ)]
Submenu Setting
Submenu Setting
[Manual Adjustment] If you set the [Color Temp.] to the
[User1] to [User5] setting, you can
adjust the color temperature.
The set values are memorized.

[Adjust Gain/Bias]:

[R/G/B Gain]: Adjusts the
color balance (gain) of R (red)/
G (green)/B (blue).

[R/G/B Bias]: Adjusts the
color balance (bias) of R
(red)/G (green)/B (blue).

[Signal]:

[Internal]: Select to adjust the
white balance by using the
internal signal. When the XYZ
format signal is input, the
internal signal is displayed as
D65 48cd/m
2
.

[External]: Select to adjust the
white balance by using the
signals input from an external
device.
[Copy From] Select from the following items to copy
the white balance data of the selected
color temperature.

[D65]

[D93]

[D61]

[D55]

[DCI]

[User1]

[User2]

[User3]

[User4]

[User5]

[DCI XYZ]
Notes

If [Password Lock] has been turned
[On], the [User1] value is protected
by a password. To change the values,
enter the password.

The color temperature data is used
commonly regardless of the signal
format or the EOTF setting. When
the color temperature is adjusted
under certain conditions, the
adjusted result is reflected in all
displays on which the same color
temperature data is set.