D:\SONY TV\SY140117_Clover 55 (Rev-3)\4533567E31_US\US03STU.fm
XBR-79X907B/79X905B/65X907B/65X905B
4-533-567-
E3
(1)
9
Getting Start
e
d
x
Guidelines for IR Remote Control
• Point your remote control directly at the
IR sensor located on your TV.
• Make sure that no objects are blocking
the path between the remote control and
the IR sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
~
•
The image is merely illustrative, depending
on your model, the infrared receiver
positioning may be different of the
illustration.
Before setting up
your TV
Some TV models are packaged with a
detached Table-Top Stand so you can
mount your TV to a wall right away. See
page 38 (Installing the TV to the Wall) if you
want to mount the TV to a wall. If you are not
mounting the TV to a wall, you will need to
attach the Table-Top Stand. You will need a
Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look
for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while
setting up your TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number
of people; larger size TVs require two or
more people (four or more people for
XBR-79X90xB).
• To avoid slipping and causing personal
injury, do not step on the TV protection
bag while unpacking the TV set.
• Correct hand placement while carrying
the TV is very important for safety and to
avoid damage.
XBR-79X90xB
(Continued)
