19
GB
Us
in
g MENU Fu
nc
ti
o
n
s
KLV-32/22T550A
4-153-893-
E1
(1)
Display Area
Adjusts the screen area for displaying the picture.
“Normal”:
Displays the picture in the original size.
“-1”/“-2”:
Enlarges the picture to hide the edge of the picture.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when “Wide Mode” is set to “Zoom”.
Vertical Size
Adjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom” or
“Zoom”.
Set-up menu
Auto Start-up
Starts the initial set-up procedure. Usually, you do not need to do this operation because
it was done when the TV was first installed (page 5). However, this option allows you
to repeat the process (e.g. to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
Language
Selects the language in which the menus are displayed.
AV Set-up
Video Labels
Assigns a name to any equipment connected to the rear jacks. The name will be
displayed briefly on the screen when the equipment is selected. You can skip input
signals from connected equipment that you do not want displayed on the screen.
1
Press
F
/
f
to select the desired input source, then press
.
2
Press
F
/
f
to select the desired option below, then press
.
Equipment labels:
Uses one of the preset labels to assign a name to connected
equipment.
“Edit:”:
Creates your own label. Follow steps 2 to 4 of “Programme Labels”
“Skip”:
Skips an unnecessary input source.
Speaker
Turns on/off the TV’s internal speakers.
“TV Speaker”:
The TV speakers are turned on in order to listen to the TV’s sound
through the TV speakers.
“Audio System”:
The TV speakers are turned off in order to listen to the TV’s sound
only through your external audio equipment connected to the audio output jacks.
• All items in “Sound” menu except “Dual Sound” are not available when “Speaker” is set to
“Audio System”.
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or
“PAL60”) according to the composite video signal from the input source.
Timer Settings
Sets the timer to turn on/off the TV.
Sleep Timer
Sets the TV to automatically switch to standby mode after a certain amount of time.
z
• If you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
• A notification message appears on the screen one minute before the TV switches to standby
mode.
Wake Up Timer
Sets the desired period of time to turn on the TV from standby mode.
“Time”:
Sets the desired period of time to turn on the TV.
“Duration”:
Sets how long you want the TV to stay on before switching to standby
mode again.
z
• A notification message “TV has been turned on by Wake Up Timer.” appears on the screen
when the TV is turned on using the wake up timer.
• When the “Sleep Timer” or “Wake Up Timer” is activated, the
(Timer) indicator on the
TV front panel lights up in amber.
Continued
