5
GB
S
tart-u
p Gu
ide
KLV-32/22T550A
4-153-893-
E1
(1)
3: Preventing the TV from
toppling over
1
Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2
Install a machine screw (M4 × 20, not
supplied) into the screw hole of the TV.
Attach a nut (M4, not supplied) from the
bottom of the Table-Top Stand to the screw
securely.
3
Tie the wood screw and the machine screw
with a strong cord.
z
• An optional Sony support belt kit is used to secure the
TV. Contact your nearest Sony service centre to
purchase a kit. Have your TV model name ready for
reference.
4: Performing the initial set-up
1
Connect the TV to your AC power outlet
(110-240 V AC, 50/60 Hz).
2
Press
1
on the TV.
When the TV is in standby mode (the
1
(standby)
indicator on the TV front panel is red), press
"/1
on the remote to turn on the TV.
When you turn on the TV for the first time, the
“Language” menu appears on the screen.
Follow the instructions on the screen.
3
Press
F
/
f
to select the language displayed
on the menu screens, then press .
4
Press
F
/
f
to select the country/region, then
press .
5
Press
F
/
f
to select “Home”, then press .
6
Press
G
/
g
to select “OK”, then press .
The TV starts searching for all available channels.
If a message appears for you to confirm
the antenna connection
No programmes found. Please connect antenna
(aerial) and select “Confirm” to start auto-tuning
again. If 200 channels are found, auto-tuning is
stopped.
7
When the “Programme Sorting” menu
appears on the screen, follow the steps of
“Programme Sorting” (page 21).
If you do not want to change the order in which the
channels are stored on the TV, go to step 8.
8
Press MENU to exit.
The TV has now tuned in all the available
channels.
Selecting the language, country/
region and location
Auto-tuning the TV
,
1
2
3, 4, 5, 6, 9
8
Continued
