Sony Bravia KLV-19T400A, Руководство по эксплуатации

Страница: 28 / 40

28
GB
KLV-32/26/19T400A/26/19T400G/19T400W
4-110-401- 12 (1)
Press MENU and select “Settings”. Press
F / f
to select the “Set-up” icon ( ), then press .
Display Area
Adjusts the screen area for displaying the picture.
“Normal”: Displays the picture in the original size.
“-1”/“-2”: Enlarges the picture to hide the edge of the picture.
Horizontal Shift
Adjusts the horizontal position of the picture.
Vertical Shift
Adjusts the vertical position of the picture when “Wide Mode” is set to “Zoom”.
Vertical Size
Adjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom” or
“Zoom”.
Set-up menu
Auto Start-up Starts the initial set-up procedure.
Usually, you do not need to do this operation because it was done when the TV was
first installed (page 8).
However, this option allows you to repeat the process (e.g. to retune the TV after
moving house, or to search for new channels that have been launched by
broadcasters).
Language
Selects the language in which the menus are displayed.
AV Set-up
Video Labels
Assigns a name to any equipment connected to the side (refer
A
in page 19) and rear
jacks. The name will be displayed briefly on the screen when the equipment is
selected. You can skip input signals from connected equipment that you do not want
displayed on the screen.
1 Press
F
/
f
to select the desired input source, then press .
2 Press
F
/
f
to select the desired option below, then press .
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels”
(page 31).
“Skip”: Skips an unnecessary input source.
Speaker
Turns on/off the TV’s internal speakers.
“TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound
through the TV speakers.
“Audio System”: The TV speakers are turned off in order to listen to the TV’s sound
only through your external audio equipment connected to the audio output jacks.
• All items in “Sound” menu except “Dual Sound” are not available when “Speaker”
is set to “Audio System”.
Colour System
Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”
or “PAL60”) according to the composite video signal from the input source.