30
ADJUSTMENT
WB/MURA/CUC DATA TRANSFER VIA SERVICE MODE
Apply when B* board or Panel is replaced.
1
) In “Service Mode, select “Panel/PQ” pressing button.
2)
Go to “WB/Mura/CUC data transfer”, category by or button. To
select
“WB/Mura/CUC data transfer”, press button.
3) To change data, press or button.
4)
In “WB/Mura/CUC data transfer:
a
) Select “
WB/Gamma data transfer
” by pressing or on remote
commander
until cursor is on “
WB/Gamma data transfer
”.
Selectable items are:
→ 0. SoC to T-con
→ T-con to SoC
→ Initialize data
b) To change the items, press or on remote commander.
c) Select
“[Start]” and press “Enter” button to start transfer.
[</>] Set [Home]Exit
Panel / PQ
Back
<<
WB Adjustment
>>
WB/Mura/CUC data transfer
>>
>>
>>
>>
>>
>>
>>
>>
Service Mode
[</>] Set [Home]Exit
Tuner
Wifi / BT
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Back
<<
<[
0. SoC to T-con
]>
Mura data transfer
<[
0. SoC to T-con
]>
CUC data transfer
<[
0. SoC to T-con
]>
[Start]
[</>] Set [Home]Exit
WB/Gamma data transfer
KDL-65W850C, 855C, 857C, 75W850C, 855C
