19
KDL-52S5100/52V5100
KDL-52S5100/52V5100
1-7. LCD
PANEL
REMOVAL
CAUTION: The Heat Sink and Radiation Sheet are not included in the KDL-52V5100 model LCD Panel.
When replacing the LCD Panel replacement, you must also replace the Radiation sheet. For part number information,
refer to the Exploded View section of this manual.
NOTE: Illustrations shown is KDL-52S5100 model.
1 Remove LVDS cable and holder from T-CON and LCD panel
(KDL-52S5100 Only)
Remove LVDS cable, 1 connector and holder from T-CON and LCD panel
(KDL-52V5100 Only)
2 Remove 2 screws and release LCD panel from Bezel
3 Disconnect 3 connectors from Inverter Boards
4
For KDL-52V5100 Only, remove 3 screws
and detach Heat Sink from LCD Panel
CAUTION: The LVDS cable can only be installed
one way. There is colored tape on the cable to
determine which side is attached to the TCON
and which side is attached to the BM3 Board.
Bezel
LCD Panel
KDL-52S5100 Only
Heat Sink
Radiation
Sheet
3
1
6
Double Sided Tape
Insulating Sheet Detail
2 Screw,
+BVTP2 4X16
4 Screw,
+PSW M3X8
1-7-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
→
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
→
If using a chemically pretreated cloth, please follow the instruction provided on the package.
→
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
→
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.