Sony BRAVIA KDL-46V3000, Руководство по эксплуатации

Страница: 186 / 300

20
GB
Viewing pictures from
the connected
equipment
Turn on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead (page 18)
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment (page 18)
Press / to display the connected equipment list.
Press
F
/
f
to select the desired input source, then press
. (The highlighted item is selected if 2 seconds pass
without any operation after pressing
F
/
f
.)
When the input source is set to “Skip” in the “AV
Preset” menu under the “AV Set-up” menu (page 29),
that input does not appear in the list.
Additional operations
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 18), and make
sure that images from the equipment appear on the
screen (page 20).
~
• This function is not available for a PC input source.
• You cannot change the size of the pictures.
• You cannot display analog TV video in the TV
programme picture while displaying AV1, AV2 or AV6
video in the external input picture.
1
Press TOOLS to display the Tools menu.
2
Press
F
/
f
to select “PAP”, then press .
The picture from connected equipment is
displayed on the left and the TV programme is
displayed on the right.
To Do this
Return to normal TV
mode Press DIGITAL or ANALOG.
Access the Input signal
index table (except TV
mode) Press to access the Input
signal index table. To select an
input source, press
F
/
f
, then
press .
Change the volume of
the connected HDMI
control compatible
audio system Press
2
+/-.
Mute the sound of the
connected HDMI
control compatible
audio system Press
%
.
Press again to restore.
Options Description
Close Closes the Tools menu.
Picture Mode (except
PC input mode) See page 23.
Display Mode (in PC
input mode only) See page 23.
Sound Mode See page 25.
Speaker See page 29.
PAP (except PC input
mode) See page 20.
PIP (in PC input
mode only) See page 21.
Auto Adjustment (in
PC input mode only) See page 32.
Horizontal Shift (in
PC input mode only) See page 32.
Vertical Shift (in PC
input mode only) See page 32.
i Volume Adjusts the volume of the
headphones.
Sleep Timer (except
PC input mode) See page 30.
Power Saving See page 30.
Auto Clock Set Allows you to switch to digital
mode and obtain the time.