Getting Started
>
Installing the TV
> Preparation for a Table-Top Stand
Preparation for a Table-Top Stand
Follow the assembling steps required to place on a TV stand.
1) Remove the Table-Top Stand. For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
2) Place the Table-Top Stand on a level and stable surface.
The screws are attached to the Table-Top Stand.
3) Gently slide the TV unit onto the neck of the Table-Top Stand and align the screw holes.
Do not put stress on the LCD panel or the frame around the screen.
Be careful to not pinch your hands or the AC power cord when you install the TV unit to the Table-
Top Stand.
4) Use the supplied screws to attach the TV unit to the Table-Top Stand (refer to the “Attaching the Table-
Top Stand” flyer found inside the carton). If an electric screwdriver is used, set the torque to tighten at
approximately 1.5 N·m, 15 Kgf·cm.
Back to How to Carry the TV
Next to Using a Wall-Mount Bracket
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started
Operating the TV
Exploring Fun Features
TV Home Menu
Other Information
Specifications
