Sony BRAVIA KDL-40V5500, Руководство по эксплуатации

Страница: 27 / 96

27
GB
Us
ing
Hom
e
Ne
twork
Fe
a
ture
s
Depending on the network device, the file format
may be converted before transfer. In such cases,
the file format resulting after conversion is used
for playback. For details, refer to the instruction
manual for the network device being used.
Even files conforming to one of the file formats
given above cannot be played in some cases.
• The file name and folder name support only
English.
To enjoy photographs, music and
videos on the TV screen by operating
devices
– Renderer
Renderer is a feature for playing photo, music
and video files stored in network devices
(digital still cameras, mobile phones, etc.) on
the TV by operating the controller device in
question. To use this feature, a renderer-
compatible device such as a digital still camera
or mobile phone is required as the controller.
Refer as well to the instruction manual
supplied with the controller.
1
Set “Renderer Function,” “Renderer
Access Control” and “Renderer Set-up” in
“Network Settings” if necessary
(page 40).
2
Play the file selected using the controller
on the TV.
The file is played on the TV over the
connected network.
Use the controller or the TV’s remote to
perform operations during playback.
z
• You can register the background music to be
played during a slideshow using (Photo).
While playing back music, press OPTIONS , then
select “Add to Slideshow,” or while displaying a
photograph, press
OPTIONS , then select “Music
Selection.”
Checking the Network
Connection
Enter the respective (alphanumeric) values for
your router. The items that need to be set may
differ, depending on the Internet service
provider or the router. For details, refer to the
instruction manuals that have been provided
by your Internet service provider or supplied
with the router.
1
Press HOME .
2
Press G to select “Settings.”
3
Press F / f to select “Network Settings,”
then press .
4
Select “Network,” then press .
5
Select “IP Address Settings,” then press
.
6
Select an item, and press .
When you select “DHCP (DNS
automatic)”
Go to step 7.
When you select “DHCP (DNS manual)”
Set “Primary DNS”/“Secondary DNS”
using
F
/
f
/
g
and the number buttons.
When you select “Manual”
Set the following items using
F
/
f
/
g
and
the number buttons.
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS/Secondary DNS
If your ISP has a specific proxy server
setting
Press OPTIONS , then press F / f to select
“Proxy Set-up” and press . Then enter
the settings.
7
Press .
8
Press
g
to select “Test,” then press .
9
Press
G
/
g
to select “Yes,” then press .
The network diagnostic starts.
When the message “Connection
successful.” appears, press
RETURN
repeatedly to exit.
z
• If “Connection successful.” does not appear, see
“Troubleshooting” (page 47).