10
GB
D:\SONY TV\SY160216_KM324049 PL1 IM\4691180111_GB\040CTI.fm
masterpage: Left
KDL-49W757E / 49W667E / 43W757E / 40W667E / 32W617E
4-691-180-
11
(1)
Setting up the Internet
Connection
To use the network features of your TV it needs
to be connected to the Internet. The set-up
procedure differs depending on the type of
network and LAN router. Before setting up the
Internet connection, be sure to set up a LAN
router. Check your wireless LAN environment
using the following chart.
Wireless LAN
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-Touch
Secure System (AOSS). Most of the latest routers have
this function. Check your router.
Type 1:
Follow the configuration for
Secured
network with Wi-Fi Protected Setup™
(WPS)
.
Type 2:
Follow the configuration for
Secured
network without Wi-Fi Protected
Setup™ (WPS)
.
Type 3:
Follow the configuration for
Unsecured
network with any type of wireless
LAN router
.
Type 4:
Follow the configuration for
Wired
network set-up
.
The WPS standard makes security of a wireless
home network as straightforward as pressing
the WPS button on the wireless LAN router.
Before setting up a wireless LAN, check the
location of the WPS button on the router and
verify how to use it.
For security purpose, [WPS (PIN)] provides a
password for your router. Password is renewed
every time you select [WPS (PIN)].
1
Press
HOME
, then select [Settings]
[Preferences]
[Setup]
[Network]
[Network Setup].
2
IP Address setting/Proxy server:
– automatic setting:
[Set up network connection]
[Easy]
– manual setting:
[Set up network connection]
[Expert]
[Wired Setup] or [Wireless Setup]
3
Select [WPS (Push Button)] for Push
Button method or [WPS (PIN)] for PIN
method.
Note
Button name of the WPS may differ depending on
the router (e.g. AOSS button).
4
Follow the instructions on the set-up
screen.
Note
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and any
equipment previously connected to the wireless LAN
in a non-secure status will be disconnected from the
network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or, you
can deactivate the security settings of the wireless
LAN router, and then connect the equipment to a TV
in a non-secure status.
• To use the network with IPv6, select [Settings]
[Preferences]
[Setup]
[Network]
[IPv6/IPv4 Priority]
[IPv6], then select [Easy] in
[Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
Connecting TV to the Internet
Secure Wireless LAN?
NO
k
Type 3
YES
m
Do you use a wireless LAN
router compatible with Wi-Fi
Protected Setup™ (WPS)?
NO
k
Type 2
YES
m
Type 1
*
Wired LAN
,
Type 4
Type 1: Secured network with Wi-Fi
Protected Setup™ (WPS)