Sony BRAVIA KDL-32R420A, Руководство по эксплуатации

Страница: 38 / 48

38
GB
AV Set-up
“AV-Preset”
Assigns a name to any equipment connected to the side and rear sockets.
The name will be displayed briefly on the screen when the equipment is
selected.
1 Press
F
/
f
to select the desired input source, then press .
2
Press
F
/
f
to select the desired option below, then press .
•
AV1 (or AV2 or HDMI1 or HDMI2/MHL or Component),
CABLE, SAT, VCR,
DVD/BD, HOME THEATRE, GAME, CAM, DIGITAL CAMERA, PC: Uses
one of the preset labels to assign a name to connected equipment.
• “Edit”: Creates your own label.
1 Press
F
/
f
to select the desired letter or number (“_” for a blank
space), then press
g
.
If you input a wrong character
Press
G
/
g
to select the wrong character. Then, press
F
/
f
to select the
correct character.
2 Repeat the procedure in step 1 until the name is completed, then
press .
• “Skip”: Skips over the input labelled “Skip” when you press the INPUT
button.
“AV2/Component Input”
Switches between Component input and AV2 input. If you select “Auto”, the
TV detects the terminal connection signal and switches to either Component
or AV2.
~
• You cannot use Component and AV2 at the same time.
“Headphone/Audio Out”
Sets the sound output to headphones or external audio system connected
to the TV. Disconnect headphones from the TV when you select “Audio Out”.
BRAVIA Sync
Settings Allows the TV to communicate with equipment that is compatible with the
BRAVIA Sync Control function, and connected to the HDMI/MHL sockets of
the TV. Note that communication settings must also be made on the
connected equipment.
“BRAVIA Sync Control”: Sets whether or not to link the operations of the
TV and the connected equipment that is compatible with BRAVIA Sync
Control.
“Auto Devices Off”: When this is set to “On”, the connected equipment that
is compatible with BRAVIA Sync Control turns off when you switch the TV to
standby mode using the remote.
“Auto TV On”: When this is set to “On”, the TV turns on when you turn on
the connected equipment that is compatible with BRAVIA Sync Control.
“Auto Input Change (MHL)”: When this is set to “On”, an MHL device is
switched to MHL input automatically. If the TV is in standby mode, it will not
switch automatically. Select “Off” to disable it.
“BRAVIA Sync Device List”: Displays a list of connected equipment that
is compatible with BRAVIA Sync Control.