7
US
D:\SONY TV\SY150026_SE1L LA8 IM\4574467E11_US\040GES.fm
masterpage: Left
KDL-40R375C / 32R325C
4-574-467-
E1
(1)
Ge
tting S
tar
te
d
US
Consider the following measures when
securing your TV to a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use
two angle braces (not supplied) to
secure the Stand.
For each angle brace use the
appropriate hardware to:
Attach one side of the angle brace to
the wall stud.
Attach the other side to the Stand.
2
Secure the TV to the Stand.
Use the optional hardware listed as
follow (not supplied):
M4 machine screws (screwed into the
TV’s rear cover).
A screw or similar (attach it to the
Stand).
Rope or chain (strong enough to
support the weight of the TV). Make
sure that there is no excess slack in the
rope or chain.
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please refer to below
illustration.
3
Anchor the TV to the wall by using
bolts, wall anchor and chain (or
rope).
Please see below illustration for M4 eye
bolt length.
Note
• Your TV is shipped with screws attached to the
rear of the TV depending on the TV model. (They
are fastened in the screw holes for wall
mounting.)
• Securing the TV to the Stand without securing
the TV and the Stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow the
three measures recommended.
Recommended Measures to Secure
the TV
Angle braces
(not supplied)
Stand
Screw
(not supplied)
Rope or
chain
(not
supplied)
Screw
hole on
the rear
cover
M4
machine
screw
(not
supplied)
8 - 12 mm
Screw M4
Rope or chain
TV
Wall-mount holes
Rope or
chain (not
supplied)
Eye bolt
(M4) (not
supplied)
Wall-anchor
(not supplied)
8 - 12 mm
M4 eye bolt
TV’s rear cover
