12
GB
KDL-40/32/26U2000
2-693-044-41(0)
Overview of the TV
buttons and indicators
1
MENU (page 16)
2
/ – Input select/OK
• In TV mode (page 23): Selects the input source
from equipment connected to the TV sockets.
• In TV menu: Selects the menu or option, and
confirm the setting.
3
2
+/-/
G
/
g
• Increases (+) or decreases (-) the volume.
• In TV menu: Moves through the options left (
G
)
or right (
g
).
4
PROG +/-/
F
/
f
• In TV mode: Selects the next (+) or previous (-)
channel.
• In TV menu: Moves through the options up (
F
) or
down (
f
).
5
1
– Power
Switches the TV on or off.
Note
To disconnect the TV completely, pull the plug from
the mains.
6
– Picture Off/Timer indicator
• Lights up in green when the picture is switched off
(page 19).
• Lights up in orange when the timer is set
(page 20).
• Lights up in red when digital REC starts in standby
mode.
7
1
– Standby indicator
Lights up in red when the TV is in standby mode.
8
"
– Power indicator
Lights up in green when the TV is switched on.
9
Remote control sensor
Watching TV
1
Press
1
on the TV (top side) to switch on
the TV.
When the TV is in standby mode (the
1
(standby)
indicator on the TV (front) is red), press
"/1
on
the remote to switch on the TV.
2
Press DIGITAL to switch to digital mode or
ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
3
Press the number buttons or PROG +/- to
select a TV channel.
Watching TV
3
1
2
2
3
1
010COV.book Page 12 Friday, January 19, 2007 9:53 AM
