Sony Bravia KDL-22EX55 Series, Руководство по эксплуатации, Страница: 16 / 40

16
GB
7: Performing the
initial set-up
1
Connect the TV to your AC power outlet
(mains socket).
2
Press "/1 on the TV. The = (power)
indicator will light up in green.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
~
• When you turn on the TV for the first time,
the TV requires some internal processing
for optimisation before you can perform the
initial setup. There will be no picture and
sound, and the timer indicator on the front
of the TV blinks orange for about 40
seconds. Do not turn off the TV during this
process.
This process has been completed at the
factory for some TVs.
3
Press F / f / G / g to select an item, then press
.
Follow the instructions on the screen.
Digital Auto Tuning:
“Antenna” or “Cable”:
Select “Antenna” to receive terrestrial TV
broadcasting by an external antenna.
Select “Cable” if you are a Cable TV
subscriber not using an external Set-Top
Box. When you select “Cable”, we
recommend that you select “Quick Scan”
for quick tuning. Set “Frequency” and
“Network ID” according to the information
supplied from your cable provider. If no
channel is found using “Quick Scan”, try
“Full Scan” (though it may take some time).
~
• In some countries, you may select
“Antenna” instead of “Cable” to receive
Cable TV programmes.
• “Full Scan” may not be available
depending on your region/country.
Programme Sorting: Changes the order
of analogue channels stored in the TV.
1
Press F / f to select the channel you
want to move to a new position, then
press .
2
Press F / f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
Network Set-up: Sets up the Internet
settings. Select “Auto” to connect to the
network automatically. Select “Custom” to
connect manually.
If you do not access the Internet, or to set
up later, select “Skip”.
~
• If you use WEP security, select “Custom”
t “Wireless Set-up” t “Scan”. Then,
select the network name (SSID) you want to
connect. If you cannot find the required
network name, select “[Manual Entry]” and
press
to enter network name.
• Use the optional USB Wireless LAN
Adapter to connect with your wireless
router (or access point) at 5GHz. Insert
USB Wireless LAN Adapter and set
“Standby for Wi-Fi Direct” to “Off”. Press
HOME , then select “Settings” t “Network”
t
“Standby for Wi-Fi Direct”
t
“Off”.
• To set “Network Set-up” later, press HOME ,
then select “Settings” t “Network” t
“Network Set-up”.