C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(23-03)KDL-22E53xx-
Ginger\4149085121KDL22E53xx\090MEN.fm
masterpage:Left
34
GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-
xx
(x)
Screen Format
Sets “Screen Format” for displaying pictures from your PC.
Normal
Displays the picture in its original size.
Full 1
Enlarges the picture to fill the vertical display area, while
maintaining its original proportion.
Full 2
Enlarges the picture to fill the display area.
Video Settings
Colour System
Sets the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, or
“NTSC4.43”) according to the input signal from the input source.
Audio Settings
Speaker
TV Speaker
Turns on and outputs the TV’s sound from the TV speakers.
Audio System
Turns off the TV speakers and outputs the TV’s sound from
external audio equipment connected to the audio output
sockets/jacks on the TV.
Audio Out
Variable
When using an external audio system, volume output from
audio out can be controlled using the TV’s remote.
Fixed
The audio output of the TV is fixed. Use your audio
receiver’s volume control to adjust the volume (and other
audio settings) through your audio system.
Headphone Settings
i
Speaker Link
Switches the TV’s internal speakers on/off when you connect
headphones to the TV.
i
Volume
Adjusts the volume of the headphones when “
i
Speaker
Link” is set to “Off”.
i
Dual Sound
Sets the sound from the headphones for a bilingual broadcast.
Optical Out
Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL)
jack of the TV. Set to “Auto”, when connecting equipment compatible with Dolby
Digital. Set to “PCM”, when connecting equipment not compatible with Dolby
Digital.
Set-up
USB Auto Start
Automatically starts photo playback when the TV is turned on and a digital still camera or
other device storing photo files is connected to the USB port then turned on.
~
• Playback does not start automatically if the TV is turned on after connecting the
digital still camera or other device to the USB port.
Quick Start
The TV turns on faster than usual by turning on the power using the remote.
However, power consumption in standby mode is approximately 20 watts higher
than usual. Up to 3 out of 5 time zones can be set.