14
GB
Tip
You can also display the Digital Electronic Programme Guide (EPG) by selecting “Digital EPG” in the “MENU”.
Set a programme to be displayed
automatically on the screen when it starts
– Reminder
1
Press
F
/
f
/
G
/
g
to select the future programme you want to
display.
2
Press .
3
Press
F
/
f
to select “Reminder”.
4
Press
to automatically display the selected programme
when the programme starts.
A
c
symbol appears by that programme’s information.
Note
If you switch the TV to standby mode, it will automatically turn itself on
when the programme is about to start.
Set the time and date of a programme you
want to record – Manual timer REC
1
Press .
2
Press
F
/
f
to select “Manual timer REC”, then press
.
3
Press
F
/
f
to select the date, then press
g
.
4
Set the start and stop time in the same way as in step 3.
5
Press
F
/
f
to select the programme, then press
to set the
TV and your VCR timers.
A
symbol appears by that programme’s information. The
indicator on the TV (front) lights up.
Notes
• You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
• Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
• If an age restriction for programmes has been selected, a message asking for pin
code will appear on the screen. For more details refer to “Parental Lock” on
page 27.
Cancel a recording/reminder – Timer list
1
Press .
2
Press
F
/
f
to select “Timer list”.
3
Press
F
/
f
to select the programme you want to cancel, then
press .
A display appears to confirm that you want to cancel the programme.
4
Press
g
to select “Yes”, then press
to confirm.
To
Do this
010COV.book Page 14 Thursday, August 9, 2007 2:23 PM
