Sony BRAVIA KD-43X7000E, Руководство по эксплуатации

Страница: 40 / 84

40 GB

Reconfigure your network settings.

If the LAN cable is connected to an active server
and the TV has acquired an IP address, check your
DLNA Certified™ media server’s connections and
configurations.
Note
• Your IP address configuration can be viewed by
selecting the [View Network setting and status]
option.
DLNA Certified™ media server is inaccessible
although it is listed under [Media] in the
Home Menu

Check your LAN cable/connection or your server
connections. The TV may have lost connection
with the server.

Perform [Server Diagnostics] to check if your
media server is properly communicating with the
TV. Press
HOME , then select [Settings]

[System
Settings]

[Set-up]

[Network]

[Home
Network Setup]

[Server Diagnostics].
When using the renderer function, music files
cannot be played back

Some applications display a photo file pre-
installed in the PC simultaneously with music
playback when using the renderer function.
Depending on the pre-installed photo file, music
playback may not be possible, but may become
possible by changing the photo file.
You could not connect Internet

Check that the LAN cable or AC power cord of the
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
You do not have YouTube ID

If you do not have a YouTube ID and password,
register them through the address below.
http://www.google.com/device
(You can also register a YouTube ID and password
from your PC.)
After registering your ID, you can use it
immediately.
The TV turns off automatically (the TV enters
standby mode)

Check if the [Sleep Timer] is activated (page 23).

Check if the [Duration] is activated by [On Timer]
(page 23) or [Photo Frame Settings]
(page 23).

Check if the [Idle TV Standby] is activated
(page 25).
Some input sources cannot be selected

Select [Label Video Inputs] and select [Always] of
the input source (page 24).
The remote control does not function

Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]

Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select [Off] in [BRAVIA Sync Control]

If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 24).
The [Parental Lock] password has been
forgotten

Enter 9999 for the PIN code.

Update PIN code by pressing HOME and select
[Settings]

[System Settings]

[Parental Lock]

[Change PIN Code].
Store Display Mode or Promoting Feature
Logo appears on the screen

On the remote control, press RETURN then press
HOME and select [Settings]

[System Settings]

[Set-up]

[Auto Start-up]. Be sure to select
[Home] in [Location].
General