KDL-32BX359
15
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a
mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
TABLE-TOP STAND AND REAR COVER REMOVAL
A
Gently place TV face down onto a soft cloth and remove 3 screws from Table-Top Stand.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1
4-423-357-11
REAR COVER (32APOT)
[2]
2
4-410-252-01
BRACKET, VESA (APOT)
3
X-2584-208-1
STAND ASSEMBLY (32APOT)
▲
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends that
you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV to the Wall
Mount Brackets.
△
2-580-640-01
SCREW, +BVTP2 4X16
●
2-580-592-01
SCREW, +PSW M3X8
○
4-159-298-01
SCREW, +PSW M4X10
3
2
1
B
Remove 15 screws from Rear Cover.
CAUTION: Do not damage the Power Board
Connector and AC Power Cord when removing
the Rear Cover.
C
Carefully lift Rear Cover from bottom
side and push forward to release top
hooks.
D
Hold Power Supply Cord while lifting up
Rear Cover, then pass Power Supply
Cord through Rear Cover opening.
Do not pull the AC Power Cord or damage
the connector on the Power Board.