C:\Users\user\Desktop\SONY TV\SY19_SG_IN5_RG_111\Full-set
data\4748173111\4748173111_GB.fm
master page: Right
KD-55X7002G / 49X7002G / 43X7002G
4-748-173-
11
(1)
9
GB
Installing the TV to the Wall
Use the Wall-Mount Bracket (not supplied) to install the TV to the wall.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV’s weight.
• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket
thickness. Please see below illustration.
Note
• Be sure to store the removed screws in a safe place, keeping them away from children.
• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Setup Guide and follow
in reverse order the steps to detach the Table-Top Stand.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth when
removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD display. (KD-49/43X7002G
only)
KD-55X7002G
1
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
2
To detach the Table-Top Stand from the TV.
8 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
TV’s rear cover
Screw (not supplied)
Wall-Mount Bracket (not supplied)
