41
4K 2SI diamond marks
This function is for displaying a test pattern like the following in
the area at the bottom right of the 4K color bar when 4K
2-sample interleave output. OK is displayed if the connections
for Links 1 to 4 are correct, and OK is not displayed if they are
incorrect. This function can be used to check the connections.
NETWORK menu
<HD CUTOUT>
C11
HD CUTOUT
OFF
, ON
HD CUTOUT function on/off setting (available only
when SZC-2001/2001M/2001W is installed)
MODE
SIMPLE HD
,
ZOOM&PERSPECTIVE
HD CUTOUT mode selection
SIMPLE HD: HD image cut out as-is from 4K image.
ZOOM&PERSPECTIVE: When HD image is cut out
from 4K image, distortion is corrected. Zoom in/out is
supported.
CUTOUT CH
1
, 2
Specify the cut-out frame to control.
CENTER H
–2048 to +2047,
0
Center position of cut-out frame (H)
CENTER V
–1080 to +1079,
0
Center position of cut-out frame (V)
ZOOM
1.0 to 4.0,
2.0
Zoom factor
CAMERA TILT
–45.0 to +45.0,
0
Camera tilt angle
CAMERA ROLL
–5.0 to +5.0,
0
Camera roll angle
FOCAL LENGTH
7
to 500,
∞
Lens focal length (2.8× lens focal length when
LA-FZB2 is connected).
∞
: Equivalent to simple CUTOUT with zoom
<HFR PAINT OFFSET>
C12
DETAIL LEVEL
–99 to 99,
0
Sets the offset amount of DETAIL LEVEL to be added
to HD HFR video.
DETAIL LEVEL is the standard for HD normal speed
that is set from the MSU/RCP. 0 is the same as HD
normal speed.
DETAIL CRISP
–99 to 99,
0
Sets the offset amount of DETAIL CRISP to be added
to HD HFR video.
DETAIL CRISP is the standard for HD normal speed
that is set from the MSU/RCP. 0 is the same as HD
normal speed.
<SR Live
METADATA(OUTPUT)>
C13
META
OFF
, ON
SR Live metadata embed on/off setting
1st F
LINE9 to LINE20,
LINE14
Line number used in 1st field
2nd F
LINE572 to LINE583,
LINE577
Line number used in 2nd field
Page name
Page No.
Item
Set value
Meaning
Correct connections
When Link 1 and Link
2 have been swapped
Page name
Page No.
Item
Set value
Meaning
<IP ADDRESS
SETTINGS>
N01
IP ADDRESS
0.0.0.0
to 255.255.255.255
IP address setting
SUBNET MASK
0.0.0.0
to 255.255.255.255
Subnet mask setting
DEFAULT GATEWAY
0.0.0.0
to 255.255.255.255
Gateway IP address setting
SET
ENTER to execute
MAC ADDRESS
00:00:00:00:00:00 to
FF:FF:FF:FF:FF:FF
MAC address of the unit (display only)
