Sony BKSR-2025, Руководство по установке

Страница: 9 / 18

1-3 (E)
BKSR-2025/2035
1-2-2. BKSR-2035
General Information
. The BKSR-2035 can be inserted into any slot exept slot
No.6 of VSR-2000A is mounted to.
. Stick the slot label supplied with the BKSR-2035 onto
the connector panel after the board installation to prevent
the incorrect insertion when the board replacing.
. Do not open the slot to keep the air-cooled effect of
VSR-2000A. Be sure to attach the blank panel to vacant
slot.
.
It is not necessary to adjust after board installation/
replacement.
Procedures
1. Turn off the power switch of the VSR-2000A.
2. Remove the two screws, and remove the blank panel
of any slot.
n
Keep the removed blank panel.
VSR-2000A
BVTT
3
x 6
BVTT3
x
6
Blank panel
3. Insert the BKSR-2035 to the slot. Push the handle of
the board in the direction of installing, and insert it in
the mother board completely.
4. Secure the BKSR-2035 with the two screws securing
the blank panel.
5. Stick the slot label supplied with the BKSR-2035 onto
the connector panel.
The label’s number is the same as the slot number
which the board has inserted.
n
To remove the BKSR-2035, hold the handle of the board
and pull it in the direction of removing and remove the
board to the front.
VSR-2000A (Rear side)
Slot No.6
BKSR-2035
Installing
Removing
Handles
Slot label
BKSR-2035
BVTT
3
x
6