1-16 (E)
VSR-2000A
3.
Setting for VSR-2000A setup
The following items can be set from the BZSR-2000. For details, refer to the Operation Manual
recorded in the CD-ROM of the BZSR-2000 Sample version.)
.
Encoder
Bit rate during recording
Input audio level
.
Decoder
Audio output channel
.
Network setting
IP address
Sub-net mask
Default gateway
.
Video format
NTSC/PAL
.
Checking and changing board configuration
.
Checking HDD state, replacing, formatting
.
Checking error
.
Checking record playback
1-11-2. HD (1080/59.94i) System Connection
1.
Connection
*
1 : Set the reference of the VTR to external SD. Connect the NTSC signal that is the same signal as what is connected to REF IN of the
VSR-2000A, to EXT REF IN SD.
.
Regarding the HD system, this system supports only the 1080/59.94i format. In this case, use the VSR-
2000A in the NTSC mode. (The VSR-2000A does not support the HD signal in the PAL mode.)
n
To transfer materials between the VSR-2000 and the VSR-2000A, both of the VSR-2000 and the VSR-
2000A must be upgraded to the same version of firmware.
If materials are transferred without upgrading, the materials may not be played back correctly.
For details of firmware upgrade, refer to Service Manual of the VSR-2000/2000A.
Signal generator (NTSC)
Computer
(BZSR-2000)
Composite Out
BNC
cable
BNC cable
Video Out
(HD-SDI)
Video Out
(HD-SDI)
REF IN
OUT
HD-SDI OUT
REF IN
*
1
HD-SDI IN
REMOTE
REMOTE
RS-232C
VTR
CONTROL
VTR
BNC cable
RCC cable
RS-232C cable
(cross)
Com 1 or 2
VSR-2000A
Audio Out
(AES/EBU)
SD
(ex. HDW-F500)
1-11. Example of System Connection
