Sony BKSM-R103, Руководство по установке

Страница: 10 / 16

2-2 (E)
BKSM-R103
1. Installation of Board
(1) Match the hole on the APR-31 board with the ejector
pin on the DEC board of the DSM-R1/D1.
(2) Connect the connector on the APR-31 board to the
connector on the DEC board.
n
Make sure that the connector is connected tightly.
(3) Secure the APR-31 board using the four screws (PWH
3 x 6) supplied with the BKSM-R103.
2. Installation of Rear Panel Assembly
(1) Remove the four screws, and remove the blank panel
from the DSM-R1/D1.
n
Keep the removed blank panel and screws.
(2) Secure the ANALOG OUT rear panel using the four
screws (B 3 x 6) supplied with the BKSM-R103.
n
The BKSM-R103 comes with the two varieties of the
ANALOG OUT rear panel assembly. Use either of the
two panels for your purpose.
. Rear panel with 3-pin XLR connectors :
Enables 2-channel audio output.
.
Rear panel with 5-pin XLR connectors :
Enables 4-channel audio output.
2-1. Installation of Board and Rear Panel
APR-31 board
DEC board
Hole
Ejector pin
Connector
Connector
APR-31 board
Ejector lever
DEC board
PWH 3 x 6
PWH 3 x 6
Blank panel
B 3 x 6
ANALOG OUT
rear panel assembly
B 3 x 6