Sony BKP-7090, Руководство по установке

Страница: 10 / 28

1-4 (E)
BKP-7090
CN31 CN21
CN32
CN23
CN12
CN13
CN24
CN18 CN17
CN16
MB-764
Label(1)
VF CN23 CCD CN24 STAND ALONE CN15(OPTION)
Partition
MB-430 board
MB-764 board
Clampers
CN23 CN24 (Option)
CN23 CN24 (Option)
Harness Arrangement
CN25(black)
CN28(red)
CN29(blue)
* RF cable
*
*
*
(6) Secure the MB-764 board with the supplied eight screws (PSW3
x
6).
n
Tighten the screws across the connector in order of
1
to
2
, then tighten the remaining screws.
When tightening the screws, take care not to drop them into the camera.
(7) Place the label (1) on the partition as shown in the figure.
(8) Unclamp the harnesses and route them as shown in the figure. Connect all the connectors that were
removed in step (4).
n
Harness routing must be changed because connectors configuration for the MB-764 board differs
from that for the former MB-430 board.
MB-764
PSW3 x 6
PSW3 x 6
PSW3 x 6
PSW3 x 6
2
PSW3 x 6
1
1-2. Installing the BKP-7090 in the BVP-700/700P