6-6
DVS-7150E IM
(5) Press
[F9]
(YES) key.
The loading of the program starts.
(6) When loading is completed, “Load Complete. Insert the OPERATING PROGRAM 2.” is indicated
on the display, and the display for the function keys is changed as follows.
(7) Insert the OPERATING PROGRAM 2 (Control panel software) to the disk drive, and press
[F10]
(EXEC) key.
Loading starts.
(8) When loading is completed, all datum of the switcher, and control are cleared.
6-2-2. Initializing of Data on RAM
(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[SETUP]
,
[1]
(SYSTEM),
[F6]
(INITIALIZE)
The display for the function keys is changed as follows.
(2) Press
[F4]
(PANEL) key (to display in the reverse) and
[F5]
(SWER) key (to display in the re-
verse), then
[F10]
(EXEC) key. The display for the function keys is changed as follows.
(3) Press
[F9]
(YES) key.
The data on the “RAM” is initialized, and all data are reset to the factory setting.
6-2. Installation of Program (BZS-7080)
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
EXEC
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
NO
YES
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
EXEC
SWER
PANEL
RESET
SWER
PANEL
ALL CLEAR
