7 (E)
3-856-836-05(1)
BDX-E1000
4
CONTROL connectors
Connect the host computer to control this unit.
10BASE-T (RJ-45 modular jack, conforming to
Ethernet IEEE802.3):
For network control.
Connect to the Ethernet connector of the host
computer.
RS-232C (D-sub 9-pin, conforming to RS-232C
standards, female):
Connect to the RS-232C
connector of the host computer.
For details, refer to the Installation Manual.
5
AUX INPUT1/2 (auxiliary input) connectors (D-
sub 9-pin, female)
For future use.
6
U
(signal ground) terminal
For signal ground. Connect when required.
7
AC INPUT connector
Connect an AC power source using the optional AC
power cord.
3/01-12_BDXE1000.05GB
01.9.4, 4:13 PM
7