Se
tting
s an
d A
d
ju
stme
nts
51
US
x
[Renderer Options]
[Auto Access Permission]: Sets whether or not
to allow automatic access from a newly detected
DLNA controller.
[Smart Select]: Allows a Sony DLNA controller
to find the system as the target component to
operate by using the infrared ray. You can set
this function to on or off.
[Renderer Name]: Displays the system’s name
as it is listed on other DLNA devices on the
network.
x
[Renderer Access Control]
Sets whether or not to accept commands from
DLNA controllers.
x
[PARTY Auto Start]
[On]: Starts a PARTY or joins an existing
PARTY at the request of a networked device
compatible with the PARTY STREAMING
function.
[Off]: Off.
x
[Media Remote Device Registration]
Registers your “Media Remote” device.
x
[Registered Media Remote Devices]
Displays a list of your registered “Media
Remote” devices.
x
[Remote Start]
[On]: Permits turning on the system from the
“Media Remote” device.
[Off]: Off.
[Easy Setup]
x
[Easy Initial Settings]
Runs [Easy Initial Settings] to make the basic
settings. Follow the on-screen instructions.
x
[Easy Network Settings]
Runs [Easy Network Settings] to make the basic
network settings. Follow the on-screen
instructions.
[Resetting]
x
[Reset to Factory Default Settings]
You can reset the system settings to the factory
default by selecting the group of settings. All the
settings within the group will be reset.
x
[Initialize Personal Information]
You can erase your personal information stored
in the system.
