36
[Ajustes de red]
x
[Ajustes de Internet]
Connect the player to the network
beforehand. For details, see “Step 2:
Preparing for Network Connection”
(page 20).
[Configuración por cable]: Select this
when you connect to a broadband router
using a LAN cable.
[Configuración inalámbrica]: Select this
when you use the wireless LAN that is
built into the player for wireless network
connection.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
x
[Estado de conexión de red]
Displays the current network status.
x
[Diagnósticos de conexión a red]
Checks for the proper network
connection by running the network
diagnostics.
x
[Conf. RF pantalla Duplicada]
[Automático]: Sets the RF (Radio
Frequency) channel band automatically
for Screen mirroring connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/
CH 6/CH 11 as priority.
x
[Ajustes de servidor de conexión]
Sets whether or not to display the
connected server.
x
[Permiso de acceso automático a
la red hogareña]
[Activar]: Allows automatic access from
newly detected DLNA controller-
compatible product.
[No]: Turns off the function.
x
[Control de acceso a la red
hogareña]
Displays a list of DLNA controller-
compatible products and sets whether or
not to accept commands from the
controllers in the list.
x
[Dispositivos remotos
registrados]
Displays a list of your registered remote
devices.
x
[Inicio Remoto]
[Activar]: Allows you to turn on the
player by a device linked via a network.
[No]: Turns off the function.
