20
Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to “Step 3:
Configuración fácil” (page 20).
Use a LAN cable to connect to the LAN
(100) terminal on the player.
z
The use of a shielded and straight interface
cable (LAN cable) is recommended.
Use the wireless LAN that is built into
the player.
Step 3: Configuración
fácil
1
Insert two Size AAA (R03)
batteries by matching the
3
and
#
ends on the batteries to the
markings inside the battery
compartment of the remote.
2
Connect the supplied AC adaptor
and AC power cord in the numeric
order shown below. When
removing them, do so in reverse
order.
Configuración por cable
Configuración inalámbrica
ADSL modem/
Cable modem
Broadband
router
LAN cable
(not supplied)
Internet
Wireless LAN
router
ADSL modem/
Cable modem
Internet
LAN cable (not supplied)
When turned on for the first time
Wait for a short while before the
player turns on and starts
[Configuración de inicio fácil].
to mains
AC adaptor (supplied)
AC power cord (supplied)
2
3
1
to DC (direct current) IN 12 V
