16
BDP-S1200/BDP-S3200/BDP-S4200/BDP-S5200
4-476-203-
41
(1)
master page=left
C:\Users\fle1\Desktop\SD130008\DATA\4476203411_
GB\030STU.fm
Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to “Step 3: Easy
Setup” (page 16).
Use a LAN cable to connect to the LAN
(100) terminal on the player.
z
The use of a shielded and straight interface
cable (LAN cable) is recommended.
Use the wireless LAN that is built into
the player.
Step 3: Easy Setup
1
Insert two R03 (size AAA)
batteries by matching the
3
and
#
ends on the batteries to the
markings inside the battery
compartment of the remote.
2
Connect the supplied AC adaptor
and AC power cord (mains lead)
in the numeric order shown
below. When removing them, do
so in reverse order.
Wired Setup
Wireless Setup (BDP-S3200/
S5200 only)
ADSL modem/
Cable modem
Broadband
router
LAN cable
(not supplied)
Internet
Wireless LAN
router
ADSL modem/
Cable modem
Internet
LAN cable (not supplied)
When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
to mains
AC adaptor (supplied)
AC power cord (mains lead)
(supplied)
2
3
1
to DC IN 12 V
