WF-1000XM3
16
Sony CONFIDENTIAL
For Authorized Servicer
3. Error Display
When the writing of the NFC tag data has failed, “Error” is dis-
played on the screen of the smartphone.
When “Error” is displayed, operate according to the procedure be-
low.
Procedure:
1. Tap “OK” button of “Error” display screen.
Tap
When error is displayed in
step 9 of “2. Writing the NFC
Tag Data”.
When error is displayed in
step 16 of “2. Writing the
NFC Tag Data”.
WF-1000XM3
WF-1000XM3
2. When error occurs in step 9 of “2. Writing the NFC Tag Data” on
page 14, operate the procedure from step 8 on page 14 again.
When error occurs in step 16 of “2. Writing the NFC Tag Data”
on page 14, operate the procedure from step 15 on page 14
again.
3. If “Error” is displayed again in step 9 or step 16 of “2. Writing
the NFC Tag Data” on page 14, after tapping “OK” button on
“Error” display screen, tap “ ” (or “
g
” etc.) twice and return to
the
fi
rst screen.
(The
fi
gure below is a reference example of an error case in step
9 on page 14)
Tap
Tap twice
WF-1000XM3
4. Tap the “Read” button.
Tap
5. In the state of the above step 4, touch the N-mark part of the
smartphone to the N-mark part of the charging case.
6. Check that the “MODE” column is other than “0000 (Read-on-
ly)”.
Check
Note:
If “MODE” column is displayed as “0000 (Read-only)”, NFC tag data
can not be written.
Prepare another new charging case again, and start to all over again
writing the NFC tag data. (The charging case indicated as “0000
(Read-only)” can not be used)
SYS SET
2020/04/03 06:12:21 (GMT+09:00)
