16
AVD-K800P
SECTION 3
TEST MODE
[Version Display Mode]
* The software version is displayed.
Procedure:
1.
Press the
?/1
button to turn the set on.
2.
To enter the test mode, press the three buttons
INPUT SELECTOR ,
.
and DISC SELECT 1
simultaneously.
3.
The message “VER #.##” is displayed for a while.
[Jog Volume Mode]
* Master Volume Check.
Procedure:
1.
Press the
?/1
button to turn the set on.
2.
To enter the test mode, press the three buttons
x
,
>
and
DISC SELECT 5 simultaneously.
3.
The message “JOG 0” is displayed.
4.
“JOG 0” value increases like +1, +2, +3 ... if rotating the
MASTER VOLUME knob clockwise, or it decreases like
-1, -2, -3, ... if rotating counter-clockwise.
5.
To exit from this mode, press the
?/1
button to turn the set
off.
[Key Check Mode]
* Keyboard check.
Procedure:
1.
Press the
?/1
button to turn the set on.
2.
To enter the test mode, press three buttons
x
,
>
and
DISC SELECT 2 simultaneously.
3.
In the key check mode, the fluorecent indicator displays
“KEYNUM 0”. Each time a button (without the
?/1
button)
is pressed, “KEYNUM 0” value increases. However, once a
button is pressed, it is no longer taken into account.
4.
To exit from this mode, press the
?/1
button to turn the set
off.
[Display Test Mode]
* Fluorescent segments and LEDs are tested when this test is
activated.
Procedure:
1.
Press the
?/1
button to turn the set on.
2.
To enter the test mode, press the three buttons
S
,
>
and
DISC SELECT 3 simultaneously.
3.
All segments turn on and all LEDs turn on.
( MULTI CHANNEL DECODING LED (blue),
DISC SELECT 1 to 5 LEDs (green, amber))
4.
Press the
>
button and confirm the display and all LEDs
turn on.
5.
Press the
>
button and confirm the display and all LEDs
turn off.
6.
Press the
>
button and confirm all segments and all LEDs
turn off.
7.
Press the
>
button and the message “STRU *.**” is
displayed.
8.
Press the
>
button and the message “DVDU *.**” is
displayed.
9.
Press the
>
button and the message “F/EU *.**” is
displayed.
10. Press the
>
button and the model name “HT-C800DP” is
displayed.
11. Press the
>
button and the destination “DEST-***” is
displayed.
12. Press the
>
button and the message “M_LED ON” is
displayed. The MULTI CHANNEL DECODING LED (blue)
is turned on.
13. Press the
>
button and the message “4-G 5-A” is displayed.
The DISC SELECT 4 (green) LED and the DISC SELECT 5
(amber) LED are turned on.
14. Press the
>
button and the message “3-G 4-A” is displayed.
The DISC SELECT 3 (green) LED and the DISC SELECT 4
(amber) LED are turned on.
15. Press the
>
button and the message “2-G 3-A” is displayed.
The DISC SELECT 2 (green) LED and the DISC SELECT 3
(amber) LED are turned on.
16. Press the
>
button and the message “1-G 2-A” is displayed.
The DISC SELECT 1 (green) LED and the DISC SELECT 2
(amber) LED are turned on.
17. Press the
>
button and the message “ALL GREEN” is
displayed. The DISC SELECT 1 to 5 (green) LEDs are turned
on.
18. Press the
>
button and the message “ALL AMBER” is
displayed. The DISC SELECT 1 to 5 (amber) LEDs are turned
on.
19. Press the
>
button. All segments turn on and all LEDs turn
on just the same as 3.
20. By pressing the
.
button, these tests are performed in
reverse order.
21. To exit from this mode, press the
?/1
button to turn the set
off.
[Disc Tray Lock]
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure:
1.
Press the
?/1
button to turn the set on.
2.
Press two buttons of
x
and
A
simultaneously for five seconds.
3.
The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure:
1.
Press two buttons of
x
and
A
simultaneously for five seconds
again.
2.
The message “UNLOCKED” is displayed and the tray is
unlocked.
Note : When “LOCKED” is displayed, the tray lock is not released
by turning power on/off with the
?/1
button.
[All Clear Mode]
* The All Clear clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customer.
Procedure:
1.
Press the
?/1
button to turn the set on.
2.
To enter the test mode, press the three buttons
S
,
.
and
DISC SELECT 1 simultaneously.
3.
The fluorescent indicator tube displays the message “ALL
CLEAR” and the set is reset.
PCM
DIGITAL EX
DTS
FM AM
ANGLE
PL II
ST
MPEG-2
PROGRESSIVE
REPEAT1
BASS
u
BOOST
AAC
SHUFFLE
MP3
MULTI PBC
ALL1DISCS
PROGRAM
D D
D D
dB
kHz
mft.
MHz
CD
VIDEO CD
SACD
DVD
S
M
H
MONO
AUTO
NTSC
TRACK
TITLE
CHAPTER
PL II
D D
PCM
DIGITAL EX
DTS
FM AM
ANGLE
ST
S
M
H
MPEG-2
PROGRESSIVE
MONO
AUTO
NTSC
TRACK
TITLE
CHAPTER
REPEAT1
BASS
u
BOOST
AAC
SHUFFLE
MP3
MULTI PBC
ALL1DISCS
PROGRAM
D D
dB
kHz
mft.
MHz
CD
VIDEO CD
SACD
DVD
Содержание AVD-K800P - 5 Dvd Changer/receiver
Страница 93: ...93 AVD K800P MEMO ...