Sony Aiwa CX-JD5, Руководство по обслуживанию, Страница: 6 / 126

6
CX-JD5
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
DVD TRAY LOCK MODE
• This mode let you lock the disc trays. When this mode is acti-
vated, the disc tray will not open when
Z OPEN/CLOSE
button
or
[DISC CHANGE]
button is pressed. The message “LOCKED”
will be displayed in the will be displayed on the fluorescent
indicator tube.
Procedure:
1. Press
[POWER]
button to turn the set ON.
2. Select DVD function.
3. Press
x button and Z OPEN/CLOSE button simultaneously
and hold down until “LOCKED” or “UNLOCKED” displayed
on the fluorescent indicator tube (around 5 seconds).
• MODEL IDENTIFICATION
MODEL PART No.
Singapore and Malaysia models 4-247-797-0
[]
E model 4-247-797-1
[]
Thai model 4-247-797-5 []
AEP and CIS models 4-247-797-7 []
Chilean and Peruvian models 4-247-797-8
[]
Australian model 4-247-797-9 []
Saudi Arabia model 4-247-798-4 []
– Rear Cover –
PART No.
Ver 1.1