124
You can protect images against accidental erasure.
Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer.
DPOF specifications are left with images after printing.
Notes
• You cannot specify DPOF on RAW images.
• You can specify any number up to 9.
Protect
Marked images
Protects selected images or cancels the protection of the
selected images.
1
Select the image you want to protect with
b
/
B
on the
multi-selector, then press the center of the multi-selector.
(To cancel a selection, press the center again.)
To protect other images or cancel the protection of other
images, repeat this step.
2
Press the MENU button. After a message appears, select
[OK] with
v
on the multi-selector, then press the center of
the multi-selector.
All images
Protects all the images or cancels the protection of all the
images in the memory card. After a message appears, select
[OK] with
v
on the multi-selector, then press the center of
the multi-selector.
Cancel all
DPOF setup
Marked images
Specifies/unspecifies DPOF on the selected images.
1
Select the image you want to specify DPOF with
b
/
B
on
the multi-selector, then select the number of sheets with
the rear control dial. (To unspecify DPOF, set the number
to “0.”)
To specify/unspecify DPOF on other images, repeat this
step.
2
Press the MENU button. After a message appears, select
[OK] with
v
on the multi-selector, then press the center of
the multi-selector.
All images
To specify/unspecify DPOF on all the images in the memory
card. When [All images] is selected, set the number of
images with
v
/
V
on the multi-selector, then press the center
of the multi-selector. After a message appears, select [OK]
with
v
on the multi-selector, then press the center of the
multi-selector.
Cancel all
