UXP X
2014-12-05
26
/ 55
IxD Blueprint
UXC
CONFIDENTIAL
ASW261 ASW260 ASW259 ASW120 ASW088 ASW087 ASW086 ASW083 ASW059
9
Disconnect and reconnect
AS A: user I WANT TO: experience that the logged data is always up to date in Lifelog.
If A1ll looses connection with the bonded device the following should happen
1) A1ll disconnected icon should appear in the status bar. If the Out-of-range
alert is turned on (view separate chapter) then A1ll should vibrate.
2) A1ll should advertise for reconnection.
A1ll and the bonded device are connected
The 2 devices loose connection due to e.g. out of range or Bluetooth off in
connected phone/tablet.
If Bluetooth is turned on again AHA shall try to
reconnect.
A1ll advertises for reconnection the first 30 minutes and after 30 minutes 40
seconds every 30 minutes.
Whenever there has been a successful reconnect with the bonded device it
should be visible in the status bar.
Disconnect and reconnect flow
1
2
3
4
A1ll will advertise for reconnection in the following cases:
•
Advertise automatically when disconnected
•
Advertise at power ON
•
Advertise manually
Pressing the key will result in advertising when A1ll is disconnected.
•
Advertise at NFC
A NFC touch when A1ll and the BT device are disconnected will result in
advertising.
