Sony 486DX Скачать руководство пользователя | Manualshive

Страница: 57 / 71

background image

AR-B1474 User

¡¦

s Guide

6-5

OnBoard FDC

This option enables the floppy drive controller on the AR-B1474.

OnBoard IDE

This option

Enabled/Disabled

the use of the IDE controller on the AR-B1474.

Parallel Port Address

This option is used to select the port address and the IRQ of the on-board parallel port. The addresses are 378H,
278H, 3BCH, and Disable. The IRQs are IRQ5 & IRQ7 for selecting.

Parallel Port Mode

This option is specifies the parallel port mode. The settings are Printer or Extended (Bi-direction). The system
support four mode: SPP, EPP & SPP, ECP, ECP & EPP for selecting.

Serial Port 1

This option is used to select the port address and the IRQs of the on-board serial port A. The options are 3F8H,
2F8H, 3E8H, 2E8H, and Disable. The system support IRQ3, IRQ4, IRQ5, and IRQ9 for selecting.

Serial Port 2

This option is used to select the port address and the IRQs of the on-board serial port B. The options are 3F8H,
2F8H, 3E8H, 2E8H, and Disable. The system support IRQ3, IRQ4, IRQ5, and IRQ9 for selecting.

6.4 ADVANCED CHIPSET SETUP

This option controls the configuration of the board’ s chipset. Control keys for this screen are the same as for the
previous screen.

Automatic Configuration

If selecting a certain setting for one BIOS Setup option determines the settings for one or more other BIOS Setup
options, BIOS automatically assigns the dependent settings and does not permit the end user to modify these
settings unless the setting for the parent option is changed. Invalid options are grayed and cannot be selected.
There is two department: DRAM Setting and ISA Bus Clock & Timing Setting

AR Bus Clock Select
DRAM Read Wait State

DRAM Write Wait State
CACHE Read Wait State
CACHE Write Wait State
Cycle Check Point

These options set the DRAM and Cache RAM access speed. If AUTO Config Function option is enabled, the other
options will return to the default settings.

I/O Recovery Feature
I/O Recovery Period

If I/O Recovery Feature option is enabled, the BIOS inserts a delay time between two I/O commands. The delay
time is defined in I/O Recovery Period option.

Memory Remapping

If this option is enabled, the un-shadowed RAM area will be remapped to 1MB area above.

«
...
55
56
57
58
59
...
»

Содержание 486DX








































































Отзывы:

Нет отзывов

Похожие инструкции для 486DX

Z3-DM8168-PCI-RPS

Бренд: Z3 Technology Страницы: 20

Z3-DM8107-SDI2-RPS

Бренд: Z3 Technology Страницы: 75

Бренд: Z-Wave Страницы: 13

Бренд: Harmonic Страницы: 56

Бренд: Orban Страницы: 255

OMB-DAQBOARD-3000 Series

Бренд: Omega Страницы: 108

Бренд: Altera Страницы: 93

NetVanta 6355 PoE

Бренд: ADTRAN Страницы: 46

Бренд: Telex Communications Страницы: 28

Fan Tray 8820-S2-900

Бренд: Paradyne Страницы: 6

Бренд: Xmart Страницы: 8

D-NVR4108HS-4KS2/L

Бренд: Dahua Страницы: 33

Бренд: Active Communications Страницы: 10

Бренд: Teridian Страницы: 2

Бренд: ATTO Technology Страницы: 2

Бренд: SilverStone Страницы: 16

Sporlan Division SCS-PB Series

Бренд: Parker Страницы: 10

Бренд: Juniper Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды