background image

4

For customers in Europe

Disposal of Old Electrical & Electronic Equipment 
(Applicable in the European Union and other European 
countries with separate collection systems)

This symbol on the product or on its packaging indicates that this 
product shall not be treated as household waste. Instead it shall be 
handed over to the applicable collection point for the recycling of 
electrical and electronic equipment. By ensuring this product is 
disposed of correctly, you will help prevent potential negative 
consequences for the environment and human health, which could 
otherwise be caused by inappropriate waste handling of this 
product. The recycling of materials will help to conserve natural 
resources. For more detailed information about recycling of this 
product, please contact your local Civic Office, your household 
waste disposal service or the shop where you purchased the 
product.

Notice for the customers in the countries applying EU 
Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku 
Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product 
safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, 
Germany. For any service or guarantee matters please refer to the addresses given 
in separate service or guarantee documents.

For the customers in the U.S.A.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this 
manual could void your authority to operate this equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.

Содержание 4-105-930-12(1)

























































































Отзывы: