background image

24

GB

Other operations

Notes

• You cannot select the Play Timer and Timer 

Recording at the same time.

• If you use the Timer Recording and the Sleep Timer 

at the same time, the Sleep Timer has priority.

• The Timer Recording will not be activated if the 

system is turned on.

• The volume is reduced to minimum during Timer 

Recording.

• Do not operate the system from the time the system 

turns on until the recording starts (about 15 seconds 
before the preset time).

Tips

• The system turns on 15 seconds before the preset 

time.

• When the Timer Recording is selected, “REC” lights 

up in the display.

The demonstration display and the clock display 
can be turned off to minimize the amount of 
power consumed during standby mode (Power 
Saving Mode).

Press DISPLAY repeatedly while the 
system is turned off until the 
demonstration display and the clock 
display disappears from the display.

To cancel Power Saving Mode

Press DISPLAY repeatedly while the system is 
turned off. Each time you press the button, the 
display changes cyclically as follows:
Demonstration

1)

 

t

 Clock

2)

 

t

 No display 

(Power Saving Mode)

1)

The display changes and the indicators flashes even 
when the system is turned off.

2)

“--.--” appears in the display if you have not set the 
clock.

Note

You cannot do the following operations during Power 
Saving Mode:
– Setting the clock (page 9)
– Changing the AM tuning interval (page 14)
– Turning on the system by pressing the function 

buttons (CD, TAPE A/B, TUNER/BAND, TV or 
VIDEO/MD)

– Changing CD power manage setting (page 14)

Tips

• The timer continues to operate in Power Saving 

Mode.

?/1

 

indicator lights up in red color even in the 

Power Saving Mode.

To

Do this

Check the setting

1

Press CLOCK/TIMER 
SELECT.
“SELECT” appears in the 
display.

2

Press –

.

 or 

>

+ (or 

press 

.

 or 

>

 on the 

unit) repeatedly to select 
“REC SELECT?”, then press 
ENTER.

Change the setting Start from step 1.
Cancel the timer

1

Press CLOCK/TIMER 
SELECT.
“SELECT” appears in the 
display.

2

Press –

.

 or 

>

+ (or 

press 

.

 or 

>

 on the 

unit) repeatedly to select 
“TIMER OFF?”, then press 
ENTER.

Display

Turning off the display

— Power Saving Mode

Содержание 2-661-374-11(4)









































Отзывы: