Sony 10001, Руководство по обслуживанию

Страница: 54 / 116

Main
code Sub code
(1) Sub code
(2) Error message Description
D1 01 pp PORT x ENC DMA1 ER-
ROR The memory data transfer error occurred on DIO-95
board that is installed to the port “x” (Port A to D).
There is a possibility that the record is not normally
done.
• Probable cause: IC200 on DIO-95 board
• Protected operation: None
D1 03 pp PORT x ENC PROC ER-
ROR The encoding process error occurred on DIO-95 board
that is installed to the port “x” (Port A to D). There is a
possibility that the record is not normally done.
• Probable cause: IC1000, IC1200, IC1400,
IC1600, IC1800 on DIO-95 board
• Protected operation: None
2-2-8. Main Code D2
When an error was detected during playback process, the following error occurs.
Main
code Sub code
(1) Sub code
(2) Error message Description
D2 03 pp PORT x DEC PROC ER-
ROR The decoding process error occurred on DIO-95 board
that is installed to the port “x” (Port A to D). There is a
possibility that the playback is not normally done.
• Probable cause: IC1000, IC1200, IC1400, IC1600
on DIO-95 board
• Protected operation: None
2-2-9. Main Code D3
When an error was detected while writing to the internal memory, one of the following errors occurs.
Main
code Sub code
(1) Sub code
(2) Error message Description
D3 01 ss SLOT Mx AV WRITE
ERROR1 A recording error of video and audio that originated in
the interface was detected in the internal memory.
• Probable cause 1: IC400 on MEC-40 board
• Probable cause 2: Internal memory
• Protected operation: None
D3 02 ss SLOT Mx AV WRITE
ERROR2 A recording error of video and audio that originated in
the memory was detected in the internal memory.
• Probable cause: Internal memory
• Protected operation: None
2-2-10. Main Code D4
When an error was detected while reading from the internal memory, the following error occurs.
Main
code Sub code
(1) Sub code
(2) Error message Description
D4 01 ss SLOT Mx AV READ
ERROR1 A playback error of video and audio that originated in
the interface was detected in the internal memory.
• Probable cause 1: IC400 on MEC-40 board
• Probable cause 2: Internal memory
• Protected operation: None
PWS-4400
2-8