43
TV (1Seg)
Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, hold down
-
for at least one second.
Disclaimer notes are displayed.
Use
j
to check the disclaimer notes, use
j
to select
OK
, and then press
c
(
選択
[Select]).
The initial setting screen for using the au Media Tuner is
displayed.
Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
Use
j
to select
オート設定(放送波)
(Auto
(Broadcasting wave)) and then press
c
(
選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
Select
マニュアル設定
(Manual) to set the channel
manually.
➡
•
➡
•
Watching TV (1Seg)
When the standby screen is displayed, hold down
-
for at least one second.
To Change Channels
Use
s
to change channels.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
Channels cannot be changed with
when the data
operation screen is displayed.
■
•
•
EZ Channel-Plus/EZ Channel
1ch
2ch
…
12ch
TV (1Seg)
Change channels one by one.
Program 16
Program 2
Program 1
…
EZ Channel-Plus/EZ Channel
1ch
2ch
…
12ch
TV (1Seg)
Change channels one by one.
Program 16
Program 2
Program 1
…