4
Getting started
Getting started
Assembly, SIM card, battery, turning on,
help, calls
Assembly
Before you start using your phone, you
need to insert a new SIM card and the
battery.
SIM card and battery
To insert SIM card and battery
1
Turn off the phone. Remove the battery
cover by sliding the battery cover down,
then lifting.
2
With the contacts facing up, slide the
SIM card into the holder until it clicks
into place.
3
Insert the battery with the label side up
and the connectors facing each other.
4
Slide the battery cover into place.
qç=êÉãçîÉ=íÜÉ=pfj=Å~êÇ
1
Turn off the phone. Remove the
battery cover and battery.
2
Push the SIM card in to release.
Battery
To charge the battery
1
Connect the charger to the phone.
Wait approximately 2.5 hours or until
the battery icon indicates a full charge
before removing the charger.
2
Remove the charger plug by pulling up
and out.
Some functions use more battery
power than others and may require
more frequent recharging. If talk time
or standby time becomes noticeably
shorter, replace the battery. Only use
approved batteries from Sony Ericsson
.
Do not connect the charger unless the
battery is inserted.
≈
2.5 h
This is the Internet version of the User's guide. © Print only for private use.
