19
Making and Ans
w
e
ring Calls
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press
c
.
Use
a
to select
Func/Settings
and then press
c
(Select).
Use
j
to select
Sound/Vib/Lamp
and then
press
c
(Select).
Use
j
to select
Incoming Setup
and then press
c
(Select).
Use
j
to select
Incoming Call
and then press
c
(Select).
Use
j
to select
(Ringtone Volume) and
then press
c
(Select).
Use
j
to adjust the volume and then press
c
(Set).
Each press of
j
changes the volume one step.
STEP
↑
The ring tone volume gradually increases.
STEP
↓
The ring tone volume gradually decreases.
Level5
↑
Level3
↓
Level1
The ring tone sounds at the set volume.
OFF
The ring tone does not sound.
Press
%
(OK).
➡
➡
➡
➡
➡
➡
•
➡
Turning On the Answer Memo
When the standby screen is displayed, hold down
C
for at least one second.
is displayed on the standby screen.
Turning Off the Answer Memo
When the standby screen is displayed, hold down
C
for
at least one second. The answer memo is turned off and
disappears from the standby screen.
The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
Answer memo is a function that automatically answers
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
Playing a Message
If a message is recorded,
Answer Memo
appears
on the standby screen.
Use
d
to select
Answer Memo
and then press
c
(Select).
Use
j
to select the message you want to play
and then press
c
(Play).
To stop playing the message, press
c
(Stop).
■
•
•
■
➡
➡
•
