9. SAFETY AND PRODUCT CARE
41
LZ T 123 7 605 P1C
9. Safety and Product Care
Please read the information in this section and the information in
“Installation of the Control Terminal”, page 44, before starting your
integration work.
9.1 Safety Instructions
PLEASE READ THESE SAFETY INSTRUCTIONS AND KEEP A
COPY OF THEM.
• Always ensure that use of the Control Terminal is permitted. The
Control Terminal may present a hazard if used in proximity to personal
medical electronic devices. As a rule, the Control Terminal must not be
used in hospitals, airports or planes.
• Never use the Control Terminal at a gas station, refuelling point,
blasting area or in any other environment where explosives may be
present.
• Operating the Control Terminal close to other electronic devices, such
as antennas, television sets, and radios may cause electromagnetic
interference.
• This product is intended to be used with the antenna or other radiating
element at least 20cm away from any part of the human body. In
applications where this rule cannot be applied, the application designer
is responsible for providing the SAR measurement test report and
declaration.
• You are responsible for observing your country's safety standards, and
where applicable, the relevant wiring rules.
9.2 General Precautions
• The Control Terminal as a stand alone item is designed for indoor use
only. To use outside it must be integrated into a weatherproof enclosure.
Do not exceed the environmental and electrical limits as specified in
“Technical Data”, page 49.
• Avoid exposing the Control Terminal to lighted cigarettes, naked
flames or to extreme hot or cold temperature.
• Never try to dismantle the Control Terminal yourself. There are no
components inside the Control Terminal that can be serviced by the
user. If you attempt to dismantle the Control Terminal, you may
invalidate the warranty.
• The Control Terminal must not be installed or located where the
surface temperature of the plastic case may exceed 85
°
C.
• All cables connected to the Control Terminal must be secured or
clamped, immediately adjacent to the Control Terminal's connectors, to