Sony Ericsson GS64, Руководство по интеграции

Страница: 53 / 92

LZT 123 1836 53
5.11 Serial Data Interfaces
The serial channels consist of two UARTs and a USB port. These provide
communication links to the application or accessory units.
The serial channels can be used in differing configurations, depending upon the
users requirements and application. In practice, both UARTs can be configured as
either the control interface or the logging interface. Similarly, control and logging
can be carried out simultaneously on the USB interface. However, the common
(default) configuration options are described:
•
UART1 has full RS-232 functionality and is used for all on- and off –line
communication (modem sleep & wake functional control is an integral
component of this interface). Its intended use is that of the primary command
(AT) interface.
• UART2 behaves as a general-purpose serial data link. It can be used for data
logging and de-bugging purposes. It can also be used as a data interface to
peripheral devices, such as a GPS receiver.
• The USB port provides a convenient general purpose peripheral (slave) port for
use with host devices which have USB controllers.
5.11.1 UART1
Pin Name Direction Function
53 RI Output Ring Indicator
54 DCD1 Output Data Carrier Detect (UART1)
55 DTR1 Input Data Terminal Ready (UART1)
57 RTS1 Input Ready To Send (UART1)
58 CTS1 Output Clear To Send (UART1)
59 DTM1 Input Data To Module from host (UART1)
60 DFM1 Output Data From Module to host (UART1)
56 DSR1 Output Data Set Ready (UART1)
UART1 is a full featured Universal Asynchronous Receiver Transmitter providing full-
duplex asynchronous communication.