manualshive.com logo in svg

Sony Ericsson GM29, Руководство интегратора, Страница: 228 / 264

Поделиться
Скачать
Sony Ericsson GM29 Скачать руководство пользователя страница 228

GM29 INTEGRATOR’S MANUAL

228

LZT 123 7361 R1B

The maximum length is fixed

15.10 *E2STKE

STK Send Short Message

Unsolicited Result Code:

*E2STKE: <coding>, < text_length >, <alpha_id>

The ME passes the <alpha_id> within SEND SHORT MESSAGE 
command to the external application, by means of the unsolicited result 
code *E2STKE. This informs the external application that the ME is 
sending an SMS.

The maximum length is fixed.

<alpha_id>

Description

String type

Field of string type between “”. Coding is according to EF

AND

 as 

defined in GSM 11.11

<coding>

Description

0

Text is coded in unpacked format, using the SMS default 7-bit coded 

alphabet, as defined in GSM 03.38 with bit 8 set to 0.  It corresponds to 

data coding scheme of 8 bit

1

Text is coded in packed format, using the SMS default 7-bit coded 

alphabet, packed in 8-bit octets, as defined in GSM 03.38. It corresponds to 

data coding scheme of 7 bit GSM default alphabet

<text_length>

Description

Integer type (0-240)

Value indicating the maximum length of field <alpha_id>

<alpha_id>

Description

String type

Field of string type format between “”. Coding is according to EF

AND

 

as defined in GSM 11.11

‘FF’

In case that the SIM does not provide the optional alpha identifier, or 

this is a null data object, the ME shall give ‘FF’ to indicate “Sending 

SMS”, so that the external application is informed

Содержание GM29









































































































































































































































































Отзывы:

Нет отзывов